Quick answer: A suspected blocked DPF needs the cause and filter condition assessed before choosing regeneration, cleaning or replacement. A warning light or loss of power alone cannot confirm which treatment is right.
Updated 10 November 2026 · DPF Experts · Kent, Essex and Hertfordshire
How do I know whether the DPF is actually blocked?
DPF warnings, reduced power and limp mode are reasons to investigate. They can overlap with other vehicle faults. Tell the technician which lights are on, what the message says, when the symptoms started and whether the filter has recently been cleaned or replaced.
Diagnosis should consider fault codes and relevant live data. The pressure sensor supplies information used to assess filter loading, so its readings need to make sense before the filter is condemned. Clearing codes without investigating the cause is not a repair.
Regeneration, cleaning or replacement: which do I need?
- Regeneration: burns soot when the vehicle and system conditions permit it. Follow the handbook for your exact model. Do not assume that a high-rev drive is appropriate, especially with additional warnings or poor drivability.
- Professional cleaning: may be suitable after assessment. The method depends on the contamination and condition; an on-vehicle clean is not automatically suitable for every filter.
- Further repair or replacement: may be needed when the filter is damaged or another fault prevents the system working correctly. Regeneration does not remove accumulated non-combustible ash.
Manufacturer limits matter. Ford, for example, explains that an overloaded filter can reach a point where regeneration is no longer available. A technician should check suitability rather than repeatedly forcing regeneration.
Why does my DPF block again after cleaning?
A repeat warning needs fresh diagnosis. The original cause may remain, or the new warning may concern something else. Ask whether the pressure-sensor readings are credible and whether the vehicle can complete its normal regeneration process. Share any previous diagnostic report and repair invoices.
Do not treat a second clean as a substitute for repairs. Keeping to the vehicle’s servicing requirements and addressing diagnosed faults are part of looking after the system.
What should I ask before paying for DPF work?
- What evidence supports the diagnosis?
- Is the filter suitable for the proposed cleaning method?
- What faults need separate repair, and what is the quoted cost?
- What post-clean checks are included?
- What does any cleaning warranty cover, and what must I do to keep it valid?
How DPF Experts can help
Our mobile DPF service visits homes and workplaces in Kent, Essex and Hertfordshire. DPF Advanced Clean starts from £299 and includes diagnostics, pressure-sensor validation, a manual clean where suitable and a post-clean diagnostic check.
DPF Clean & Protect starts from £399 and includes a 60-day cleaning warranty under the full terms. Separate faults still need repair. Prices are starting prices; availability and appointment length depend on the job.
Call 0330 133 2439 or request a callback with your registration, postcode and symptoms. If the vehicle is not safe to drive, follow the handbook and contact roadside assistance.
Related DPF advice
Technical references
General guidance only; your own vehicle handbook takes priority. See Ford’s explanation of regeneration limits and ash maintenance (a model-specific example, not instructions for every vehicle), and Bosch on differential-pressure sensing.

